Select Grab at checkout to use PayLater.
Subject to Grab's eligibility and credit limit.
💡 Buying High-Value Gold? BNPL accounts have personal spending limits.
To avoid checkout decline, check your available limit inside your Grab, Atome, or Shopee app before purchasing.
The displayed price is the total item price in Singapore. GST is included where applicable. Qualifying investment gold bars are GST-exempt.
📈
Live Rate Active: This competitive price is locked for the next
05:00 mins.
Quantity
📏Singapore Size Guide
▼ View Charts
BEST GOLD SHOP · FIT & MEASUREMENTS
Jewellery Size Guide
Measure carefully. Choose by the item’s actual dimensions—not a size label alone.
Before ordering
Home measurements are a starting point, not a guaranteed fit. Ask our team to confirm the selected item’s dimensions and sizing system. Supplier size codes can vary; the old unverified Singapore/HK conversion chart has been replaced with physical measurements.
1. Rings
Measure a ring that already fits
Choose a round ring worn on the same finger and hand. Measure straight across the centre of its inside opening in millimetres, excluding the metal. A jeweller’s ring gauge is preferable to a ruler for final sizing.
Measure your finger
Use a ring sizer on the intended finger. It should pass over the knuckle and sit comfortably. Recheck at different times, avoiding unusually cold or swollen fingers. Wide bands and different inner profiles can fit differently; arrange an in-store fitting if unsure.
Round-ring geometry reference—not a supplier or US size conversion
Inside diameter (mm)
Calculated inside circumference (mm)
14.0
44.0
14.5
45.6
15.0
47.1
15.5
48.7
16.0
50.3
16.5
51.8
17.0
53.4
17.5
55.0
18.0
56.5
18.5
58.1
19.0
59.7
19.5
61.3
20.0
62.8
20.5
64.4
21.0
66.0
21.5
67.5
22.0
69.1
22.5
70.7
23.0
72.3
23.5
73.8
24.0
75.4
Circumference = π × inside diameter. Values rounded to 0.1 mm; rounding is not a manufacturing tolerance. Measure the actual item. This calculation applies only to a circular opening.
Send your measurement and the product link or barcode to our team to confirm the correct product size. Do not treat a label such as “12” as a universal ring size.
2. Bangles
Closed / slip-on bangles
The bangle must pass over your hand, not just fit your wrist. Compare with a closed bangle that already fits: measure its inside opening through the centre. If measuring your hand, bring the thumb towards the little finger and measure around the widest part of the compressed hand. Ask our team to check clearance—do not force a tight bangle.
Hinged / opening bangles
Measure your wrist and confirm the item’s internal dimensions and shape. The opening mechanism changes how it is put on. A closed-bangle hand measurement cannot be used as a universal hinged-bangle size.
Circular bangle dimensions—geometry only, not a fit recommendation
Inside diameter (mm)
Calculated inside circumference (cm)
45
14.14
48
15.08
50
15.71
52
16.34
54
16.96
56
17.59
58
18.22
60
18.85
62
19.48
64
20.11
66
20.73
68
21.36
70
21.99
Circumference = π × diameter ÷ 10. Values rounded to 0.01 cm. These are internal bangle measurements, not wrist-width measurements or supplier size codes. For oval bangles, request both internal width and height; one diameter is insufficient.
3. Bracelets
Measure around the wrist at the intended wearing position using a flexible tape, without pulling it tight. Note the measurement in centimetres.
Our listed bracelet lengths are end-to-end measurements, including the clasp and end ring. The usable closed length can differ depending on the clasp, link thickness and design.
Measurements to check before selecting a bracelet
Measurement
What it tells you
Wrist circumference
Your wrist measurement at the wearing position
Listed end-to-end length
The full bracelet length, including clasp and end ring
Usable closed length
The effective wearing length when fastened
Extension range, if present
The adjustable positions available on that specific item
No single allowance guarantees a comfortable fit for every design. Compare a similar bracelet that fits, and ask our team about the selected item. Check the product listing for an extension chain rather than assuming one is included.
4. Necklaces & Chains
Use a flexible tape or cord to try your preferred length around the neck, then measure the cord against a ruler. Allow for the pendant’s drop and weight. Where a chain sits varies with neck size, body shape and clothing.
Length conversions: 1 inch = 2.54 cm exactly
Length (cm)
Length (inches, rounded)
40
15.75
45
17.72
50
19.69
55
21.65
60
23.62
65
25.59
70
27.56
Conversions are rounded to two decimal places. A chain labelled 18 inches is 45.72 cm, not exactly 45 cm. Confirm the product’s listed length, clasp measurement and extension range.
Let Us Check Your Fit
Send the product link or barcode, your measurement and whether you prefer a close or relaxed fit. For the most reliable result, visit us for a fitting.
Resizing depends on the item’s design and condition; confirm eligibility and any charges before purchase. Exchange deadlines and conditions are set out in the official exchange policy.
Measurement references
Ring measurement guidance: GIA ring-sizing guidance. Wrist measurement guidance: Cartier wrist-measurement guide. The geometric and unit-conversion tables above are calculated references, not either organisation’s product-size chart.
The 916 Gold Cutting Clip Earring – Italy Design is a refined piece that showcases elegant European-inspired craftsmanship with modern gold detailing. Designed with precision cutting along a sleek clip-style form, these earrings reflect light beautifully, creating a subtle sparkle that enhances the richness of pure gold.
Crafted from genuine 22K / 916 hallmark gold, the Italy design focuses on balance, proportion, and fine finishing. The cutting technique adds texture and dimension, giving the earrings a premium appearance while maintaining a lightweight and comfortable feel.
With its compact size and polished look, this clip earring design is perfect for daily wear, office styling, or understated elegance on special occasions. It delivers a confident yet refined presence without overwhelming the overall look.
Design Inspiration & Craftsmanship
Made from 100% genuine 22K / 916 hallmark gold
Italy-inspired cutting design for enhanced sparkle
Clip-style form with clean, modern proportions
Precision cutting to reflect light from multiple angles
Lightweight construction for comfortable long-hour wear
Why This Italy Design Is Loved
Elegant cutting details elevate a minimalist silhouette
Comfortable size suitable for daily and office wear
Note: Weight may vary slightly due to the handcrafted nature of gold jewelry.
Care Instructions
Store in a soft pouch or jewelry box to prevent scratches
Avoid contact with perfumes, chemicals, and moisture
Clean gently with a soft, dry cloth to maintain shine
Authenticity, Packaging & Delivery
100% authenticity guaranteed – genuine 916 gold only
E-Gold Certificate included with every purchase
Premium gift box and gift bag provided
Fast delivery within Singapore (same-day or next-day available)
The 916 Gold Cutting Clip Earring – Italy Design is a perfect blend of modern elegance and classic craftsmanship — a refined gold accessory designed for effortless everyday luxury.
🎁 Included with Every Purchase:
✔️ Elegant Gift Box
✔️ Luxury Gift Bag
✔️ Official Tax Invoice
✔️ E-Gold Certificate (Digital Authentication)
Each purchase from Best Gold Shop is prepared with care and Guaranteed Authenticity.
